English 
 |
The high-temperature heat transfer oil pump is an ideal hot oil circulation pump or heat carrier transfer pump, and is an ideal supporting pump for heat exchange equipment.RY type high temperature heat transfer oil pump has reasonable structure, excellent performance and reliable use.This thermal oil pump is suitable for transporting high-temperature liquids that do not contain solid particles.Its corrosion resistance and operating temperature depend on the materials of the main parts in contact with the medium.
The high-temperature thermal oil pump adopts a self-heating heat dissipation structure, which changes the traditional water cooling structure, making the structure simple, small in size, saving operating costs, good performance, and reliable in use. It is a second-generation product developed on the basis of our country’s digestion and absorption of foreign oil pumps. The basic structural form is a single-stage single-suction cantilever foot support structure. The inlet of the high-temperature heat transfer oil pump is axial suction, and the outlet is vertically upward in the center. It is installed on the base together with the motor.
The Y-type high-temperature heat transfer oil pump uses imported polytetrafluoroethylene (PTFE for short) as the lip seal, which improves the sealing performance. It is 25 times more reliable than rubber seals and has extremely strong corrosion resistance.
The support of the high-temperature heat transfer oil pump adopts a double-end ball bearing support structure. The front end is lubricated with lubricating oil, and the rear end is lubricated with grease. There is an oil conduction pipe in the middle to observe the sealing condition and recover the heat transfer oil at any time.
Y-type high-temperature heat transfer oil pump adopts a combination of packing seal and mechanical seal. The packing seal uses high-temperature resistant packing and has good thermal adaptability, while the mechanical seal uses carbide material with high mechanical strength and good wear resistance. , ensuring sealing performance under high temperature conditions.
Y-type high temperature heat transfer oil pump applicable scope:
1. Petroleum and chemical industry
2. Oil industry
3. Synthetic fiber industry
4. Textile printing and dyeing industry
5. Plastic and rubber industry
6. Paper industry
7. Timber industry
8. Construction industry
Y-type high-temperature thermal oil pumps are also widely used in the machinery industry, food industry, pharmaceutical production, hot oil furnace oil supply circulation systems, and hot oil heating circulation systems.
Y-type high temperature heat transfer oil pump performance range (according to design point):
1. Flow rate 1-500m3/h;
2. Lift 10-125m;
3. Temperature -20.C-350.C.
Model meaning: Take RY100-65-200A as an example
The high-temperature heat transfer oil pump is an ideal hot oil circulation pump or heat carrier transfer pump, and is an ideal supporting pump for heat exchange equipment.RY type high temperature heat transfer oil pump has reasonable structure, excellent performance and reliable use.This thermal oil pump is suitable for transporting high-temperature liquids that do not contain solid particles.Its corrosion resistance and operating temperature depend on the materials of the main parts in contact with the medium.
The high-temperature thermal oil pump adopts a self-heating heat dissipation structure, which changes the traditional water cooling structure, making the structure simple, small in size, saving operating costs, good performance, and reliable in use. It is a second-generation product developed on the basis of our country’s digestion and absorption of foreign oil pumps. The basic structural form is a single-stage single-suction cantilever foot support structure. The inlet of the high-temperature heat transfer oil pump is axial suction, and the outlet is vertically upward in the center. It is installed on the base together with the motor.
The Y-type high-temperature heat transfer oil pump uses imported polytetrafluoroethylene (PTFE for short) as the lip seal, which improves the sealing performance. It is 25 times more reliable than rubber seals and has extremely strong corrosion resistance.
The support of the high-temperature heat transfer oil pump adopts a double-end ball bearing support structure. The front end is lubricated with lubricating oil, and the rear end is lubricated with grease. There is an oil conduction pipe in the middle to observe the sealing condition and recover the heat transfer oil at any time.
Y-type high-temperature heat transfer oil pump adopts a combination of packing seal and mechanical seal. The packing seal uses high-temperature resistant packing and has good thermal adaptability, while the mechanical seal uses carbide material with high mechanical strength and good wear resistance. , ensuring sealing performance under high temperature conditions.
Y-type high temperature heat transfer oil pump applicable scope:
1. Petroleum and chemical industry
2. Oil industry
3. Synthetic fiber industry
4. Textile printing and dyeing industry
5. Plastic and rubber industry
6. Paper industry
7. Timber industry
8. Construction industry
Y-type high-temperature thermal oil pumps are also widely used in the machinery industry, food industry, pharmaceutical production, hot oil furnace oil supply circulation systems, and hot oil heating circulation systems.
Y-type high temperature heat transfer oil pump performance range (according to design point):
1. Flow rate 1-500m3/h;
2. Lift 10-125m;
3. Temperature -20.C-350.C.
Model meaning: Take RY100-65-200A as an example
</template>
