English 
 |
Drawing on the principle of refrigeration, the energy-carrying medium completes the continuous cycle of gas → liquid → gas in a closed cycle system. The medium releases and absorbs heat during the phase change process. The heat energy released is used to heat up and evaporate the material liquid, and the absorbed heat energy The heat of condensation comes from the secondary steam generated by the evaporation of the feed liquid.By utilizing both hot and cold sides of energy, liquid material concentration, solvent evaporation and solvent recovery are achieved.
This equipment is widely used in dehydration processes in pharmaceutical, food, chemical, biological, environmental protection and other industries. It is more suitable for organic solvents (mainly used in flammable and explosive categories): such as methanol, ethanol, ethyl acetate, acetone, n-hexane Evaporation and concentration of organic solvents such as solutions; it can also be applied to the evaporation and concentration of aqueous solutions.
1. When the equipment is started and running, it requires very little industrial steam preheating (which can be replaced by electric heating). The normal operation of the equipment does not require steam, achieving pure
Electric heating evaporation;
2. The entire operating temperature of the equipment is 45-65°C. The evaporation temperature can be adjusted at any time according to different material properties. In addition, the heat source for heating should not be higher than 80°C.
It is especially suitable for evaporation and concentration of heat-sensitive materials;
3. This set of equipment adopts PLC automatic control, which has a high degree of automation and low labor intensity. It can automatically feed, discharge, and automatically detect and control density during the entire process.
, automatic control of evaporation temperature, vacuum degree and other intelligent work;
4. The equipment adopts modular design and assembly, and the equipment is debugged before leaving the factory. When shipped to the factory, it can work after being docked with the user's supporting equipment;
5. The equipment operates with high safety. The compressor in the device compresses not the gaseous solvent, but the heat exchange working fluid that exchanges heat with the material, completely avoiding safety hazards. In addition, this set of equipment has a complete set of electrical explosion-proof designs, which is highly safe. ;
6. Low operating costs. The comparison of operating costs between traditional steam evaporator and this set of equipment is as follows (evaporation capacity: 1000L/h)
| name | Ordinary single effect evaporator | XD high-efficiency energy-saving evaporator | ||
| aqueous solution | weak | aqueous solution | weak | |
| Steam consumption (kg/h) | 1200 | 750 | 30(preheating material) | 20(preheating material) |
| Cooling water consumption (t/h) | 45 | 70 | 13 | 13 |
| Total electric energy (Kw/h) | 12 | 12 | 75 | 50 |
Drawing on the principle of refrigeration, the energy-carrying medium completes the continuous cycle of gas → liquid → gas in a closed cycle system. The medium releases and absorbs heat during the phase change process. The heat energy released is used to heat up and evaporate the material liquid, and the absorbed heat energy The heat of condensation comes from the secondary steam generated by the evaporation of the feed liquid.By utilizing both hot and cold sides of energy, liquid material concentration, solvent evaporation and solvent recovery are achieved.
This equipment is widely used in dehydration processes in pharmaceutical, food, chemical, biological, environmental protection and other industries. It is more suitable for organic solvents (mainly used in flammable and explosive categories): such as methanol, ethanol, ethyl acetate, acetone, n-hexane Evaporation and concentration of organic solvents such as solutions; it can also be applied to the evaporation and concentration of aqueous solutions.
1. When the equipment is started and running, it requires very little industrial steam preheating (which can be replaced by electric heating). The normal operation of the equipment does not require steam, achieving pure
Electric heating evaporation;
2. The entire operating temperature of the equipment is 45-65°C. The evaporation temperature can be adjusted at any time according to different material properties. In addition, the heat source for heating should not be higher than 80°C.
It is especially suitable for evaporation and concentration of heat-sensitive materials;
3. This set of equipment adopts PLC automatic control, which has a high degree of automation and low labor intensity. It can automatically feed, discharge, and automatically detect and control density during the entire process.
, automatic control of evaporation temperature, vacuum degree and other intelligent work;
4. The equipment adopts modular design and assembly, and the equipment is debugged before leaving the factory. When shipped to the factory, it can work after being docked with the user's supporting equipment;
5. The equipment operates with high safety. The compressor in the device compresses not the gaseous solvent, but the heat exchange working fluid that exchanges heat with the material, completely avoiding safety hazards. In addition, this set of equipment has a complete set of electrical explosion-proof designs, which is highly safe. ;
6. Low operating costs. The comparison of operating costs between traditional steam evaporator and this set of equipment is as follows (evaporation capacity: 1000L/h)
| name | Ordinary single effect evaporator | XD high-efficiency energy-saving evaporator | ||
| aqueous solution | weak | aqueous solution | weak | |
| Steam consumption (kg/h) | 1200 | 750 | 30(preheating material) | 20(preheating material) |
| Cooling water consumption (t/h) | 45 | 70 | 13 | 13 |
| Total electric energy (Kw/h) | 12 | 12 | 75 | 50 |
</template>
