English 
 |
Model meaning:
IH50-32-160A-304
IH-International standard chemical pump 50-The diameter of the pump suction port is 50mm 32-The diameter of the pump discharge port is 32mm 160-The nominal diameter of the impeller is 160mm A-The impeller outer diameter cutting code 304-The material of the pump contact liquid parts is ZG0Cr18Ni9Ti
Performance range (design point):
When the flow rate is 1.6-400m3/h, the head is 5-125m, and the design pressure is 1.6MPa
Pump structure description: 1. The main parts of IH type chemical pump include pump body, impeller, impeller nut, pump cover, sealing parts, suspension parts, etc.The structural features of the pump are: the pump cover is fixed on the middle bracket through the stop, and then the pump cover is clamped in the middle through the connection between the pump body and the middle bracket port.The pump body is of axial suction, radial discharge, and foot-supporting type, and can be directly fixed on the base.The suspension components are fixed on the middle bracket through the spigot and supported on the base with the suspension.During maintenance, it is not necessary to disassemble the inlet and outlet connecting pipes and pump body for maintenance.Shaft seals come in various forms, such as packing and mechanical seals, which can be selected according to the nature of the conveyed medium and the requirements of the production process.2. The pump is connected to the motor through a coupling. Viewed from the driving end, the pump rotates clockwise.
3. Material: According to the corrosion condition of the liquid, the appropriate material for the flow-passing part of the pump can be selected.The main materials include SUS304, SUS316L, etc.
Model meaning:
IH50-32-160A-304
IH-International standard chemical pump 50-The diameter of the pump suction port is 50mm 32-The diameter of the pump discharge port is 32mm 160-The nominal diameter of the impeller is 160mm A-The impeller outer diameter cutting code 304-The material of the pump contact liquid parts is ZG0Cr18Ni9Ti
Performance range (design point):
When the flow rate is 1.6-400m3/h, the head is 5-125m, and the design pressure is 1.6MPa
Pump structure description: 1. The main parts of IH type chemical pump include pump body, impeller, impeller nut, pump cover, sealing parts, suspension parts, etc.The structural features of the pump are: the pump cover is fixed on the middle bracket through the stop, and then the pump cover is clamped in the middle through the connection between the pump body and the middle bracket port.The pump body is of axial suction, radial discharge, and foot-supporting type, and can be directly fixed on the base.The suspension components are fixed on the middle bracket through the spigot and supported on the base with the suspension.During maintenance, it is not necessary to disassemble the inlet and outlet connecting pipes and pump body for maintenance.Shaft seals come in various forms, such as packing and mechanical seals, which can be selected according to the nature of the conveyed medium and the requirements of the production process.2. The pump is connected to the motor through a coupling. Viewed from the driving end, the pump rotates clockwise.
3. Material: According to the corrosion condition of the liquid, the appropriate material for the flow-passing part of the pump can be selected.The main materials include SUS304, SUS316L, etc.
</template>
